DOCTOR'S PAGE

What is Lipo-Melt?

Lipo-Melt is the most powerful non-invasive body shaping system for professionals on the market in its class. It is almost 100x more powerful than it's competition & delivers LED -based energy in the 635nm wavelength to safely & naturally slim, shape & tone the body.

The current advancements in LED technology creates tissue coverage and penetration of the light that is superior to low level laser energy, without the risks.

Lipo-Melt's revolutionary design & patent protected pads cover more surface area then any other device on the market allowing for shorter treatment times and ease of use.

More Power

The efficacy of 635nm technologies depend on the amount of light being delivered to the adipose tissue; the Lipo-Melt emits far more light energy than any other similar device. There are 4 light pads and each are 28" x 12" in size, made of soft, flexible material with 320 LEDs per pad. Each LED emits 40 mW of light energy, rating each pad at 12,800 mW, making all 4 pads rated at 51,200 mW of light energy per pad placement; this is almost a hundred times more light energy than the competition.

Higher Light Retention

More light is retained in the tissue due to the patent-protected reflective coating on the Lipo-Melt pads. No other device has this feature.

Operation Made Simple

The Lipo-Melt has a controller that is very easy to operate; you can adjust the treatment time from 5 minutes to 45 minutes, turn on/off the alarm chime, has a large timer readout and Start/Stop button and there are 5 connectors/ports on the front of the machine for up to 4 pads and a face mask, or 5 pads, all able to be operated at the same time.

Easy To Administer

By utilizing these soft/flexible, heating-pad-type of light arrays, the Lipo-Melt treatment is simple to perform; just lay the pads on or under the patient and the pads stay in place. All other similar devices utilize 8, 16 or 24 small paddles that are roughly 4"x6" in size and require an elastic/Velcro strap to hold them in place, which is very cumbersome to set and move multiple times on each patient.

Less Time Per Treatment

The 4 pads of the Lipo-Melt system will cover the average sized patient with one placement of the pads; all other 635nm devices require multiple placements of their small light paddles, increasing the overall treatment time and operator time.

More Sanitary With Less Effort

The required cleaning of the 4 light pads, between patients, with the Lipo-Melt system is much easier and faster than cleaning 8, 16 or 24 light paddles of the other devices. The clear plastic sheet that covers the patient side of the Lipo-Melt pad can be cleaned multiple times before it may need replacement, which then can be peeled off and another, low cost sheet can be installed. Also, the elastic/Velcro straps utilized by the small-paddle systems should be washed if they make contact with a patient; the Lipo-Melt pads do not require any type of retention mechanism to hold them in place.

In Review

Lipo-Melt is an affordable & easy way to generate a steady stream of income, month after month.

And the current advancements in LED technology creates tissue penetration of the light that is equal to low level laser energy, without the risk.

Simple to use, safe and hygienic, Lipo-Melt delivers effective results in just one treatment. Your patients will be able to naturally slim, shape and tone the areas of the body they want including those difficult to reach areas such as waist, hips, thighs, upper legs and even the arms.

Lipo-Melt's revolutionary design & patent protected pads cover more surface area then any other device on the market allowing for shorter treatment times and ease of use.

Call today to learn more about this very lucrative program.... (877) 821-2300.